1.If the cleanliness requirement is low, please immerse the stainless steel capillary into the heated degreasing solution and circulate and rinse with air or water. It is recommended to use the appropriate size brush to scrub back and forth. In short, it must be heated and used to effectively dissolve and disperse the grease attached to the inner wall of the degreasing solution or cleaning solution.
2.If the requirements for cleanliness are very high, please use ultrasonic cleaning. The principle of ultrasonic cleaning is that when the ultrasonic waves propagate in the liquid, the sound pressure will change rapidly, and the liquid will be a strong air phenomenon, which will produce millions of small cavitation per second. Bubbles. These bubbles are rapidly generated in large numbers under the action of acoustic pressure, will not explode violently, but will produce a strong impact and negative pressure suction, enough to quickly remove the stubborn stains.
3, if the
Stainless Steel Capillary Tube is relatively long and has its own tank, you can buy ultrasonic vibration plate and submerge it for ultrasonic cleaning. If the time is not long, insert the ultrasonic vibrator into the pipe to clean it, and then use tap water to rinse off all the dirt removed by ultrasound.